Domestic & Light Commercial Bollard – AMP 1000

Category: .

£0.00

AMP 1000 automatic bollards are designed to provide entry protection to driveways, car parking spaces and other low traffic volume locations with up to 500 bollard movements per day. They are a stylish and economical fully automatic bollard, available in either 115mm or 200mm diameter with powder coated mild steel or optional brushed stainless steel construction.

A typical installation of two AMP 1000 bollards operating together, with control gear contained within the single height Totem units with integral LED traffic lights. A typical installation of two AMP 1000 bollards

AMP 1000 bollards are electrically operated, and incorporate a soft start and stop mechanism to reduce noise and wear on the mechanism. The optional CDK control unit can operate up to 4 bollards together, and plug in loop detectors may be specified to provide a full safety system.

A remote control receiver is also available to allow bollard operation using remote control keyfob style transmitters.

Available Models

Product Code

Model

CT-A115AM-P 115mm dia. x 500mm high mild steel automatic bollard in grey RAL7022
CT-A115AS-S 115mm dia. x 500mm high stainless steel automatic bollard with brushed finish
CT-Al27AM-P 200mm dia. x 700mm high mild steel automatic bollard in grey RAL7022
CT-Al27AS-S 200mm dia. x 700mm high stainless steel automatic bollard with brushed finish

 Standard Specification AMP 1000 Automatic Bollard

Construction Mild Steel casing and bollard (304 grade stainless steel version is available)
Finish Polyester powder coated grey RAL 7022 (Stainless steel version has brushed finish).
Dimensions AMP1000/115: 115mm diameter by 500mm height above ground. Casing extends 965mm into the ground.AMP 1000/200: 200mm diameter by 700mm height above ground. Casing extends 1180mm into the ground.
Control Unit Type CDK-ES required Supplied with IP 67 rated plastic enclosure for mounting inside a building or external cabinet.
No. of Daily Cycles Up to 500 cycles per day.
Raising time 7 seconds from fully retracted to fully raised. Operates with soft start and stop
IP rating IP 67
Working Temperature Range -20°C to +60°C
Hazard Warnings Reflective strip around upper section. Optional LED lighting ring to AMP 1000/200 model.
Optional Items
Control Unit Type CDK ES with plastic enclosure
Remote Control Receiver P.0 B to plug into the control board
Remote Control Transmitter 2 Channel key-tob style, (available in packs of 5).
Safety Loop detector Dual Channel plug in detector type

datasheet-amp1000datasheet-amp1000